Page
+49 40 351947
Auto-Pyjama® Moto-Pyjama® Auto-Storm® PermaBag® PermaPack® TireShoes®

 

 

Frequently Asked Questions

 

  

How do I regenerate the PermaPack cylinders?

Preheat your oven to 220°C (430°F). Place the PermaPack cylenders into the oven and bake for approx. 4 - 5 hours. Allow the cylinders to cool down while the oven is switched off. We recommend regenerating the cylinders in the evening, then switching the oven off and removing the cylinders the following morning. Now cool the cylinders will be ready for their renewed application.

 

How often can I regenerate the PermaPack cylinders?

PermaPack cylinders can be regenerated in an oven again and again. In order to guarantee ideal conditions for long-term storage it is recommended that the PermaPack cylinders be replaced after 3-4 years of use.

 

Will the PermaPack cylinders rust?

No, PermaPack will not rust. PermaPack cylinders are made from high quality 316 Marine-Grade stainless steal and therefore will not rust if used and stored correctly. 316-stainless steel is a molybdenum-alloyed steel, the preferred steel for marine environments. This is due to its greater resistance to pitting corrosion virses that of other grades of steel. It is also the chosen steel in the manufacture of medical and surgical instruments.

 

How much moisture will PermaPack absorb?

The PermaPack will absorb up to 50% of its weight in moisture. The large 18cm cylinder has the capacity to absorb over 600ml of water whereby the smaller 6cm cylinder has the capacity of 200ml.

  

Is the contents of PermaPack Hazardous?

No. PermaPack is non-hazardous, 100% natural as well as being environmentally friendly.

 

back